**Attention:** This update file is only intended for use with FRITZ!Box 7632! Please follow the instructions at the end of this file to install the update. ``` Product: FRITZ!Box 7632 Version: FRITZ!OS 8.51 Language: Dutch, English, French, German, Italian, Polish, Slovenian, Spanish Release date: 04/11/2026 ``` # Top functions of FRITZ!OS 8.51 ## Internet: - **TOP** DNS queries from the home and guest network can be filtered using specified filter lists - **TOP** New prioritization feature automatically ensures the best connection ## DECT: - **TOP** The new "Simple Mode" for the FRITZ!Fon focuses menus and functions on telephony and greatly simplifies operation. The adjustments primarily address the limitations of older people (accessibility) and give special attention to the needs of less tech-savvy users ## Home Network: - **TOP** The Smart Check shows the current status of the FRITZ!Box in the MyFRITZ!App and outputs notifications and recommendations (for iOS: MyFRITZ!App 2.16.0, for Android: MyFRITZ!App 2.29.0) ## Smart Home: - **TOP** Overload switching for FRITZ!Smart Energy 200 and 210 smart plugs - **TOP** Smart home routines now support multiple triggers # New functions of FRITZ!OS 8.50 ## Internet: - **NEW** Automatic detection and prioritization of video conferences and similar real-time sensitive communications - **NEW** DNS queries from the home and guest network can be filtered using specified filter lists - **NEW** New configuration wizard for simplified switching from DSL to fiber optic from the same Provider - **NEW** Prioritization settings now also allow bandwidth into the home network to be reserved ## DECT: - **NEW** Simple mode: For easier operation by users with restrictions, the following functions and more are available: After activation, the soft keys can be used as quick-dial buttons, such that each button can be assigned a phone number or function - **NEW** Simple mode: The SOS call allows up to four emergency contacts to be stored, who are automatically called in sequence in case of emergency. Call duration and the number of times the call sequence repeats can be configured - **NEW** Simple mode: When using keypad dialing, the numeral entered is announced (can be disabled) ## Smart Home: - **NEW** Frequently used smart home routines such as "Leaving the House", "Coming Home" or "Vacation" can be automated with just a few clicks and triggered, for example, with zones (geofences) that were previously configured in the FRITZ!App Smart Home - **NEW** Smart home routines support IF-THEN linkages with multiple triggers ? such as, for instance, zones defined on the smartphone. This means a routine does not start until the last resident has left the house with their smartphone - **NEW** When the "Turn off in case of overload" function is enabled, smart plugs are turned off after a defined period of time when a defined power level is exceeded # Further Improvements of FRITZ!OS 8.50 ## Internet: - **Changed** The domain "fritz.box" is no longer distributed as a domain name via DHCP by default; therefore, DNS queries for hostnames are not automatically expanded - **Fixed** Internet access (remote access) to the FRITZ!Box could be configured only while the FRITZ!Box was connected to the internet - **Fixed** Internet blocks for parental controls no longer worked when a VPN connection was used - **Improved** During manual configuration of WireGuardŽ connections, now VPN connections for user dial-in can be created as well - **Improved** For VPN connections, additional "remote networks" at the remote site can be added - **Improved** For local name resolution (via mDNS), the following are supported: fritzbox.local, gateway.local, box.local (FRITZ!Box only), as well as router.local and gateway.local in general - **Improved** If a WireGuardŽ connection drops, data intended for that connection is not sent over the internet Connection - **Improved** In parental controls, the function for extending online time by 45 minutes is now supported for shared time budgets as well - **Improved** Information about the requesting device added to the event message by parental controls about blocked direct IP calls - **Improved** Optimized communication between FRITZ!Box and app reduces the probability of lost messages - **Improved** Port sharing is also possible for WireGuardŽ VPN connections that link companies - **Improved** The MTU (Maximum Transmission Unit) can be set manually for all WireGuardŽ VPN connections - **Improved** The upstream and downstream values for the top consumers are displayed in the Online Monitor - **Improved** To guarantee compatibility, the Let's Encrypt certificate for the MyFRITZ!Net address are renewed after the 2/3 of the term of validity for the current certificate has elapsed - **Improved** WireGuardŽ VPN connections can be created without a MyFRITZ!Net or DynDNS address ## Telephony: - **Improved** TCP-based call number registration via mobile network with the provider Easybell was stabilized - **Improved** Voice messages can be deleted automatically after a specified waiting period or when a specified count has been exceeded ## DECT: - **Improved** Better support for DECT phones from other manufacturers without support for CAT-iq 2.0 - **Improved** Faster audio connection of DECT phones with the "HD preferred" setting to other HD phones - **Improved** Phone numbers belonging to a phone book entry can now also be sorted later in FRITZ!Fon ## Home Network: - **Changed** The DNS suffix "fritz.box" is no longer distributed to home network devices via DHCP by default. Home network devices no longer automatically repeat failed name queries with the ending "fritz.box". The previous type of distribution can be enabled unter "Home Network > Network > Network Settings > Change Advanced Network Settings > IPv4 > DHCP" - **Fixed** In the advanced network settings, settings were offered that are not supported in the configured operation mode - **Fixed** Rendering of special characters in device names was not always correct - **Improved** User guidance added for changing and managing IPv4 addresses in the Network Device Details ## Storage (NAS): - **Improved** Internet radio stations list preconfigured for more countries - **Improved** Maximum permissible number of shares raised from 20 to 250 ## System: - **Fixed** The FRITZ!Box itself was listed as a connected network device in the "Info" push service mail - **Fixed** When LEDs were turned off, no more error conditions were displayed - **Improved** Clearer rendering of rate information in the "FRITZ!Box Info" push service mail when data capacity or free time was exceeded - **Improved** Corrected details in the offline help and translations - **Improved** Improved details in the wizard for transferring settings to a new FRITZ!Box - **Improved** The list of home network devices in the "Info" push service mail is now sorted by name - **Improved** Users can now delete individual devices from the list of known devices before transferring settings to a new FRITZ!Box and receive guidance on managing devices that cannot be reached - **Improved** When push service is enabled, the dispatch ID for sending support information to FRITZ! is also sent to the default recipient by mail # Changes of FRITZ!OS 8.50 for providers ## Internet: - **Changed** For the internet provider Drillisch, the initial configuration waits for fiber products as well, like for 1&1 - **Fixed** On FRITZ! products managed by providers, "Permit automatic updates" could be disabled manually - **Fixed** USP: In some cases, the line speed (Device.IP.Interface.*.X_AVM-DE_DownstreamSpeed) may have been set incorrectly - **Improved** USP: Maximum data rates (if available) added to the data model under [...].IEEE1905Device.{i}.Interface.{i}.X_AVM-DE_MaxPHYRateSupported bzw. ...X_AVM-DE_MaxPHYRateAdvertised) - **Improved** USP: Provisioning of the URL of an USP controller now possible via DHCP option 125 # New functions of FRITZ!OS 8.25 ## System: - **NEW** Slovenian added as a language # Further Improvements of FRITZ!OS 8.25 ## Internet: - **Improved** Better interoperability with newer browser versions - **Improved** Detailed rendering of fallback protection in Online Monitor - **Improved** Operation of schedules in the parental controls reworked for small displays (smartphones, tablets) - **Improved** Support for fallback protection also for primary internet connections with a fixed IP configuration - **Improved** Support of IPv6 configuration for fallback protection - **Fixed** IPv6 addresses were not displayed in full in the overview of WireGuardŽ connections - **Fixed** In some cases, connecting to the internet manually via "Reconnect" in the online monitor took a very long time - **Fixed** In the Connection Details in the Online Monitor, the status of the WAN connection was sometimes displayed as inactive despite an active internet connection - **Fixed** Incorrect error handling during storage of prioritization rules - **Fixed** Internet access (remote access) to the FRITZ!Box could be configured only while the FRITZ!Box was connected to the internet - **Fixed** The "Fixed bandwidth reservation for the home network" option did not always work - **Fixed** The summary of individual access profiles for parental controls displayed "No restriction" despite restrictive settings - **Fixed** When the standard profile in the parental controls was blocked, sometimes authorized devices could no longer register with the Wi-Fi network - **Changed** Root certificate added for DNS over TLS with SSL.com ## Telephony: - **Changed** Network adjustment to Deutsche Telekom telephony - **Changed** Root certificate added for encrypted VoIP with SSL.com ## Home Network: - **Fixed** In certain scenarios, unnecessary entries for switches (FA:CE:...) were displayed in the idle connections section - **Fixed** In special scenarios it was possible for the IP address 192.168.178.1 to be displayed for an extender in the home network instead of its own address - **Fixed** Names of home network devices were occasionally assigned incorrectly - **Fixed** Under some circumstances active devices with static IP addresses were displayed as inactive and vice versa - **Changed** For home network devices there is the setting to configure port sharing independently via UPnP or TR-064. This setting now also determines whether the home network can trigger clearing of the internet connection ## System: - **Improved** Robust error handling during update search - **Improved** Simplified setup: When setting up international products, it is no longer necessary to restart after selecting country and language - **Improved** Stability - **Fixed** For very slow internet connections it could happen that a FRITZ!OS update via the user interface was interrupted before completion - **Fixed** Under "Network Connections" in the FRITZ!OS interface, "connected with FRITZ!Repeater" was sometimes shown twice ------------------------------------------------------------ With each FRITZ!OS update, AVM also updates its security functions. Therefore we recommend performing the update for all devices. ------------------------------------------------------------ Note: Instructions for configuring and using Mesh functions are presented at en.avm.de/mesh-faq ------------------------------------------------------------ **Instructions for installing the update:** Use the update function offered in the user interface to install the update. This automatically offers you the right FRITZ!OS. Click "Wizards", select "Update" and then follow the instructions on the screen. --- (c) FRITZ! GmbH 2004-2026. All rights reserved. This FRITZ! GmbH firmware package contains files that are propagated under different licenses, in particular under a license held by FRITZ! GmbH or under an open-source license (namely the GNU General Public License, GNU Lesser General Public License or FreeBSD License). For details on the various licenses, see the "license.txt" file (https://download.avm.de/fritzbox/license.txt). The source code of the files propagated as open source files can be obtained upon a written request to fritzbox_info@avm.de. FRITZ! GmbH grants the non-exclusive right to use this FRITZ! GmbH firmware package, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use. FRITZ! GmbH reserves all rights that are not expressly granted to the licensee. Without previous approval in writing, and except for in cases permitted by law, it is particularly forbidden for this FRITZ! GmbH firmware packet to be - copied, propagated, or in any other manner made publicly accessible, or - processed, disassembled, reverse engineered, translated, decompiled or in any other manner "opened" and subsequently copied, propagated or made publicly accessible in any other manner. DHA 04/11/26